combined mechanism

Creation and Application of the New Cam-linkage Combined Mechanism

一种新型连杆凸轮组合机构及其应用

Analysis of Planetary Gear - geneva Combined Mechanism

行星齿轮-槽轮组合机构分析

Research and Development of the Intelligent Analysis Software of Planar Combined Mechanism

平面组合机构智能分析软件的研究与开发

Combined Mechanism Between the Construction of an Applied University and Its Journal

应用型大学学报与应用型大学建设结合机制的研究

Design and Kinematic Analysis of Combined Mechanism in Series

串联式组合机构设计及运动分析

It is a technology that has combined mechanism , electron and air pressure .

它是集机、电、气（液）一体的技术，其多关节运动类似于机械手。

Analytical Design of the Gear-Cam Combined Mechanism With the Given Movement

给定运动轨迹的齿轮&凸轮组合机构解析法设计

Infrared Sensors Array and Ultrasonic Sensors Array Information Processing Method for Combined Mechanism Mobile Robot

复合机构移动机器人红外和超声阵列信息处理方法

Analysis of Combined Mechanism in Improving Weaving Machine with Rapiers

一种复合机构在剑杆织机改造中的设计分析

A combined mechanism of removing part with internal full circle undercut from mould

整圆内侧倒扣塑料件的联合脱模机构

Interactive Design of Graphic Simulation for Gear-Linkage Combined Mechanism

齿轮连杆组合机构的交互式图形仿真设计

A new carton picking mechanism driven by Geneva wheel combined mechanism was introduced .

提出了一种新的槽轮组合驱动的取箱板机构。

Design and Kinematic Analysis for a Carton Picking Mechanism Driven by Geneva Wheel Combined Mechanism

槽轮组合驱动的取箱板机构的设计及运动分析走刀箱，诺顿机构，速度箱

Designing principle of a kind of combined mechanism doing unto three orders intermission at limit positions

一类组合机构在极限位置作直到三阶停歇的设计原理

Combined Mechanism of " Rule by Law " and " Rule by Morality " in Preliminary Stage of Socialism

社会主义初级阶段法治与德治结合机制初论

Cam profile curve design of cylindrical cam combined mechanism with straight moving - oscillating moving follower

直动-摆动从动件圆柱凸轮组合机构的凸轮廓线设计

Under the circumstance , it is necessary to set up community combined mechanism of different types and standardize community duty and right .

在此情况下亟需建立各种不同类型的社区整合机制，规范城市社区的职责与权利。

The paper pays a big attention to the combined mechanism and algorithms of TB using inference machine and optimization using linear programmes .

文章着重介绍了用推理机实现拼配和线性规划实现优化的复合机制及算法。

A universal method of intelligent identification was introduced . Basing on the method , the intelligent analysis software of planar combined mechanism was developed .

介绍了一种具有普遍意义的机构智能化识别方法，以及以该方法为基础开发的平面组合机构智能分析软件。

A Discussion on the Combined Mechanism of Double Universal Joints gears and the Oscillating Guided Bar Mechanism with Three Slides

双万向节&齿轮组合机构与三滑块摆动导杆机构的组合

Synthesis of Planetary Gear-geneva Combined Mechanism (ⅰ)

行星齿轮－槽轮组合机构综合（一）

Appling the theory of machines and mechanisms , a mathematical model was established for the design of a typical gear-linkage combined mechanism .

首先就一种典型齿轮连杆组合机构设计问题依据机械原理建立了数学模型。

The mathematic models for gas turbine , heat recovery steam generator and steam turbine combined mechanism analysis and CMAC neural networks are established .

基于融合机理和CMAC神经网络方法的燃气轮机、余热锅炉和蒸汽轮机的数学模型，进行了联合循环机组的变工况性能计算，并得出了一些相关的结论。

In the paper , research situation is deeply overviewed for mechanics including structure , common mechanism , combined mechanism , biology mechanism , analysis precision of mechanism .

本文综述了机构学的结构理论，常用机构，组合机构，生物机构学，机械动力学，机构精度分析与综合的研究现状，并简述了机构学领域的发展趋势。

Based on the actual situation of community change in northwestern regions , the article discusses the construction of community combined mechanism from the microcosmic and macroscopic aspects .

本文立足于西北民族地区城市社区变迁的实际情况，从微观和宏观两个层面来探讨城市社区整合机制的构建问题。

This thesis deals with the analysis of improved system of the steel tape rapier looms widely used , and shows the usage of combined mechanism in this reformation .

分析了钢带引纬剑杆织机引纬驱动机构的改进方案，看到了复合机构在织机改造中的应用。

When using the upper bound theorem to solve the ultimate load of frames , it is usually to set the plastic mechanism by combined mechanism method of elementary mechanisms .

用机动法求刚架的极限荷载时，常用基本机构迭加法设定破坏机构。

A steering mechanism can fully meet Ackerman steering principle was carried out . A cam-linkage combined mechanism consisting of multi-axis steering mechanism was proposed .

针对四杆机构不能完全满足Ackerman转向原理等问题，本文开展了完全满足Ackerman转向原理的转向机构的研究，提出一种由凸轮-连杆组合机构组成的多轴转向机构。

This paper presents the kinematic analysis and the optimal design on the combined mechanism of double universal joints gears and the oscillating guided bar mechanism with three slides .

本文介绍了双万向节&齿轮组合机构与三滑块摆动导杆机构之组合机构的运动分析、优化设计。

By analyzing the feature of traditional CURE algorithm , and referencing the features of the events . It improves the selecting of representative points and categories combined mechanism .

通过对传统CURE算法的分析，根据事件的特征，对代表点选取和小类合并机制进行了改进。